Duke Technologies

Automatic Rotary Dry Syrup Powder Filling Machine


Automatic Rotary Dry Syrup Powder Filling MachineThe rotary dry syrup powder filling machine is used for the filling of syrup and sealing of bottles in the Pharmaceutical industry. The rotary dry syrup filling machine is suitable for filling dry syrup, chemicals, flowing powders, talcum, pesticides powder in the containers. The dry syrup powder filling machine is used to fill the dry syrup powders in plastic, PET, LDPE, HDPE, and glass bottles. The whole structure of the rotary dry syrup powder filling machine is manufactured in stainless steel frame with S.S. Cladding. The contact parts of the machine are made up of stainless steel 316. Due to its compact and monoblock design the machine requires a small space for operation. It delivers high speed filling performance with independent moving funnel. It has a vibratory system which enables the semi free flow powder filling with high speed.


Process of operation

The dried sterilized containers are fed through the infeed table to the conveyor belt. The containers enter into the infeed star wheel which puts them below the funnel. The container is lifted by the bottom platform and it is inserted inside the funnel. The powder wheel picks the correct amount of powder. The powder wheel index further and remains in the pot till it attains the vertical position. The sterilized low pressure air sequentially flushes out powder from the port of powder wheel into the funnel. The bottle is filled in 5 to 6 seconds and reach the exit star wheel. The bottle picks up the cap from exit end of chute and the ROPP cap sealing machine caps the bottle.

Salient Features:
  • No bottle- No fill system
  • Low Air / Low Vacuum - Machine stop system
  • No bottle at infeed conveyor
  • Easy to remove contact parts
  • Star wheel system for infeed and exit of bottles
  • Constructed with SS 304 material
Technical features
Model No. DTDSP – 100 R
Output per hour 3000 to 6000  per hour
Number Of Head (Filling + Capping) 16 X 8
Fill size 3 grams to 50 grams (With help of change parts)
Container Size (For Round container)
Dia. 22mm to 80mm
Height 50mm to 200mm
(For Flat / Square container)
10mm to 50mm (Width) X 15mm to 100mm (Length)
Height 50mm to 240mm
ROPP or Screw Cap size Dia. 19mm to 38mm X 15mm to 20mm Height
Accuracy +2%
Electrical Specification 3 H.P., 415 Volts, 50 Hz
Pneumatic Air Consumption Filtered or Sterile low pressure air at 4kg / cm2 at 4 / 6 bar
Vacuum 20 HG
Dimension 2500mm (L) X 1250mm (W) X 2150mm (H)
Net Weight 2100 Kgs.