Duke Technologies

Automatic Rotary Vial Washing machine

 

Linear tunnel type vial washing machineThe Automatic Rotary Vial Washing machine is widely used in the Pharmaceutical and Biotech industry for the washing of vials. Automatic rotary vial washer has changeable parts which makes it suitable to wash different size of vials. Rotary vial washing machine has an automatic in feed and out feed system which makes it very easy to load and unload the vials. The vertical vial washing machine has a gripper which holds the vials from the neck over the spray nozzles until the washing cycle is completed. Glass vial rotary washer is suitable for washing of glass vials from inner as well as the outer side. The Rotary online washing machine has a capacity of washing 240 vial per minute. Washing sequence can be customized as per the customer requirements.

Process of operation

The ampoules are fed by an in feed tray and received by an infeed feed worm and transferred to the Star wheel. A gripper picks the vials from the starwheel and inverts it in the downward position over the washing needles. The vials move with the needle bar for washing and the ampoules are inverted again in the upside position after the washing is completed. The washed ampoules are transferred to the output tray by the output star wheel.

Salient Features:
  • Made from Stainless Steel 304 Material
  • All contact parts made of SS 316 material
  • Equipped with 3 Pumps and 3 Tanks of 25 liters each
  • Independent circuit for each washing zone
  • In-feed and out-feed of Ampoules / Vials
  • Machine performs 3 air and 3 water washes
  • Customized washing sequence according to customer needs
  • Re-circulation & Siliconization system
  • Suitable for 2ml to 100ml Vials
Technical Specification
Production Rate:
100 to 240 Vials / Minute  
Depending upon container diameter & height  
Input Specification :
Container Dia.: 16mm to 55mm Container Height: 40mm to 100mm
Power Specification :
4 H.P., 380 volts, 3 Phase, 50 Hz, 4 Wire System
(1.5 H.P. for main machine & 3 H.P. for 3 pumps pumping station)
Note - Electrical characteristics can be adjust as per customer’s domestic power requirements.
Working Height:
900 to 950mm adjustable
Overall Dimension :
2050mm (L) X 2000mm (W) X 1550mm (H)