Duke Technologies

Single Head Auger Type Powder Filling Machine

 

 

single head auger type powder filling machineThe single head auger type powder filling machine is a compact sized model that is specifically used for filling of dry syrup powder into the bottle. It stands appropriate for dry syrup, talcum, spices powder, flour free flowing powder chemicals, pharmaceutical powders, food and beverages, cosmetics powders, pesticides powder etc.





Process of operation

The single head auger filler constitutes an incoming dry bottle that is sterilized and fed through the in feed turn table with appropriate flat conveyor belt. There are two of the separate filling heads that are mounted on the machine top plate on the same line. The filling occurs in two continuous processes. In the second filling process, the head same operation is performed. But the only difference that comes in this is that the second bottle gets filled and the first bottle moves further for the next operation. The main advantage of this is that it is directly connected with Auger rotation. Thereby till the bottle get filled with powder as per the pneumatic system, the bottle will not get released thereon.

Characteristic Features:
  • The single head auger filler is a compact cGMP based model.
  • All the contact parts are made with the help of stainless steel 316 material.
  • Works on the system of no bottle-no fill.
  • There is no requirement for the change parts in the machine.
  • Imported gear and motor available for the conveyor drive.
  • Pneumatic bottle holding system available.
  • Single track bottle movement for reduction of supporting guide rails.
  • Machine’s speed adjustable with the help of A.C. frequency drive.
  • Derlin conveyor belt available for avoiding sticking of vial on the conveyor.
Technical features

Here are the technical specifications of the product:

Direction Left To Right.
Production Rate Up to 40 containers per minute
Fill Capacity 10gm to 50gm (with different set of Auger and funnel) Fill range depending upon Bottle opening and bulk density of powder.
Accuracy ± 2% depending upon consistency and the Uniformity of bulk density of powder under controlled level of Humidity (i.e.35%)
No. of Heads SINGLE
Electrical Supply 1.00 HP For Main Drive. 0.25 HP for conveyor
Power Requirement 440 Volts, 3 Phase (4 wire System) 50 Hz.
Height of Conveyor Adjustable from 850 To 900 MM
Pneumatic Air Filtered, oil free, sterile low pressure AIR at 5kg/cm2